Related Manuals for King Canada 8342
Summary of Contents for King Canada 8342
-
Page 1: Instruction Manual
14” ABRASIVE CUT-OFF SAW performance performance plus plus MODEL: 8342 INSTRUCTION MANUAL COPYRIGHT © 2002 ALL RIGHTS RESERVED BY KING CANADA TOOLS INC. - Page 2 Warranty does not apply to defects due directly or indirectly to misuse, abuse, negligence or accidents, repairs or alterations and lack of maintenance. KING CANADA shall in no event be liable for death, injuries to persons or property or for inci- dental, special or consequential damages arising from the use of our products.
-
Page 3: Safety Instructions
GENERAL & SPECIFIC SAFETY INSTRUCTIONS 1. KNOW YOUR TOOL 12. ALWAYS WEAR SAFETY GLASSES. Read and understand the owners manual and labels affixed to Always wear safety glasses (ANSI Z87.1). Everyday the tool. Learn its application and limitations as well as its eyeglasses only have impact resistant lenses, they are NOT specific potential hazards. -
Page 4: Specifications
SPECIFICATIONS & ELECTRICAL INFORMATION SPECIFICATIONS Model ............................................8342 Voltage..........................................110V Amperage ..........................................15A RPM (no load speed) ......................................3750 Phase ............................................1 Hertz ............................................60Hz Abrasive wheel dimensions (available as accessory- model: KCOW-43214) ..............14” x 3/32” x 1” WARNING ALL ELECTRICAL CONNECTIONS MUST BE DONE BY A QUALIFIED ELECTRICIAN. FAILURE TO COMPLY MAY RESULT IN SERIOUS INJURY! ALL ADJUSTMENTS OR REPAIRS MUST BE DONE WITH THE CUT-OFF DISCONNECTED FROM THE POWER SOURCE. -
Page 5: Unpacking And Assembly
UNPACKING & ASSEMBLY UNPACKING WARNING: Never operate the tool in the locked-down position. The Main Assembly head lock is used only for transporting or storing the tool. Failure to heed this warning can result in serious personal injury. 1. Carefully remove all parts from the shipping carton. 2. -
Page 6: Maintenance
ADJUSTMENTS & OPERATION ADJUSTMENTS OPERATING Adjustable stationary vise Before operating the cut-off machine, check the power supply and make sure it meets the requirements listed on the nameplate. A The adjustable stationary vise is located at the rear of your cut-off substantial voltage drop will cause a loss of power and machine machine.