Select Main Channel (1-14); Turning On; Illuminating The Display - Cobra MicroTalk MicroTalk 2-Way Radio Operating Instructions Manual

FRS305 MANUAL.qx 12/5/00 9:56 AM
Operation
Turning Turning On Your microTalk
On Your
Press and hold
microTALK
seconds. An audible "tone" will indicate the unit is
on and then the LCD will go through a 3 second
self-test and then go to Operational Mode.
Note
Whenever the unit is on you
can receive communica-
tions.

Illuminating the Display

Illuminating
the Display
Press and release
button to illuminate display for ten seconds.
4
Page 4
the power button for 2
LIGHT/MAX RANGE
Auto Battery Power Saver
Your microTALK has a unique circuit designed to
extend battery life. If there are no transmissions
within 10 seconds, the unit will automatically
switch to battery Save Mode.
The icon will flash.

Select Main Channel (1-14)

Turn on the microTALK. An audible "tone" will
indicate the unit is on and then the LCD will
go through a 3 second self-test and then go to
Operational Mode.
Select channel by moving the Channel Button
up or down.
Operation
Auto Battery
Power Saver
Note
The Auto Battery S ave Circuit
does not effect the unit 's
ability to receive incoming
transmissions.
Select Main
Channel
Note
Units must be on same
channel and subchannels to
communicate.
Note
Channels 8-12 generally are
less used and give better results
for communications in most
areas.
Note
Push and hold the channel
up/down button for fast chan-
nel advance.
5