Cobra LI 6000WXC Owner's Manual

Cobra owner's manual 2-way radio li 6000wxc

Advertisement

Owner's Manual
TWO-WAY RADIO MODEL
LI 6000 WX C
Nothing Comes Close to a Cobra
®
English

Advertisement

Table of Contents
loading

Summary of Contents for Cobra LI 6000WXC

  • Page 1 Owner’s Manual TWO-WAY RADIO MODEL LI 6000 WX C Nothing Comes Close to a Cobra ® English...
  • Page 2: Making Life Easier And Safer

    For Assistance in Canada or the U.S.A. In this user’s manual, you should find all the information you need to operate your microTALK assistance after reading this manual, Cobra Electronics offers the following customer assistance services: Automated Help Desk English and French. 24 hours a day, 7 days a week (514) 683-1771, ext.
  • Page 3: Product Features

    Product Features Introduction Wrist Strap Connector Compartment Battery Door Antenna External Speaker/ Microphone/ Hi•Low Power Charge Jack Button Talk Button Light/ Max Range Button A2 English Introduction Features • 22 Channels Seven shared with Belt Clip FRS/GMRS, seven FRS only, eight Battery GMRS only •...
  • Page 4: Caring For Your Microtalk

    Cobra for recycling. Wrap battery packs carefully and mail postage prepaid to: Cobra Electronics Corporation, 6500 West Cortland Street, Chicago, IL 60707 USA, Attn: Battery Recycling. Customer Assistance Warranty ®...
  • Page 5: Using Your Radio

    Using Your Radio Introduction For charging microTALK Insert Radio(s) charger: 1. Insert radio(s) into desktop charger as shown. 2. Insert round connector of 120 volt adapter into jack on back of charger. 3. Plug 120 volt adapter into electrical outlet. If charging light is not on, check position of radio.
  • Page 6 Using Your Radio Operation Channels Channel Buttons To select a channel: – With the radio on, select any of the 22 channels by pressing the Channel Up or Channel Down button. Channel Number Both radios must be tuned to the same channel to communicate.
  • Page 7 Using Your Radio Operation Auto Squelch/Maximum Range Your microTALK ® radio is equipped with Auto Squelch, which automatically shuts off weak transmissions and unwanted noise due to terrain and conditions. This slightly reduces the Maximum Range at which signals can be heard. You can turn off auto squelch to allow all signals to be received and extend the maximum range of your radio.
  • Page 8 Mode Functions Operation Scrolling through Mode Functions By scrolling through the Mode Functions, you will be able to select or turn on/off preferred features of your microTALK When scrolling through the Mode Functions, your radio features will be displayed in the following order: Set CTCSS Privacy Codes Mode Button Set DCS Privacy Codes...
  • Page 9 Mode Functions Operation Set DCS Privacy Codes To select a DCS privacy code: Mode Button 1. After selecting a channel, press the Mode button until the DCS icon appears and the small numbers flash on the display (01 through 83). DCS Privacy Code NOTE If CTCSS is turned on at the channel...
  • Page 10 Mode Functions Operation Voice Activated Transmit (VOX) In VOX mode, your microTALK ® radio can be used “hands-free,” automatically transmitting when you speak. You can set the VOX sensitivity level to fit the volume of your voice and avoid transmissions triggered by background noise. To turn VOX mode on or off: Mode Button 1.
  • Page 11 Mode Functions Operation 6. Choose one of the following: a. Press the Channel Up or Channel Down button to select a CTCSS privacy code (01 through 38) for the channel. b. Press the Lock/Enter button to switch from CTCSS to DCS. The DCS icon and privacy code numbers will flash on the display.
  • Page 12: Channel Scan

    Mode Functions Operation To de-program a memory location: Mode Button 1. Press the Mode button until the Memory icon and the memory location flash on the display. 2. Press the Channel Up or Channel Down Memory Icon button to select the memory location (0 through 9).
  • Page 13 Mode Functions Operation During channel scan (while receiving an incoming transmission), you can choose from the following: a. Press and hold the Talk button to communicate on that channel. Your radio will remain on that channel and return to Standby mode. b.
  • Page 14: Mode Functions

    Mode Functions Operation During privacy code scan (while receiving an incoming transmission), you can choose from the following: a. Press and hold the Talk button to communicate on that channel/privacy code. Your radio will remain on that channel/privacy code and return to Standby mode. b.
  • Page 15 Mode Functions Operation During memory location scan (while receiving an Incoming transmission), you can choose from the following: a. Press and hold the Talk button to communicate on that memory location. b. Your radio will remain on that memory location and return to Standby mode.
  • Page 16: Call Tone Settings

    Mode Functions Operation 10 Call Tone Settings You can choose from 10 different call tone settings to transmit a unique call alert. To change a call tone setting: Mode Button 1. Press the Mode button until the letter “C” and the current call tone number (01 through 10) is displayed.
  • Page 17 For Products Used in the U.S.A. FCC Licensing Required This two-way radio operates on GMRS (General Mobile Radio Service) frequencies which require an FCC (Federal Communications Commission) license. A user must be licensed prior to operating on channels 1 through 7 or 15 through 22, which comprise the GMRS channels of this radio.
  • Page 18 , microTALK ® , Nothing Comes Close to a Cobra and the snake design are registered trademarks of Cobra Electronics Corporation, USA. Cobra Electronics Corporation™ is a trademark of Cobra Electronics Corporation, USA. The Cobra line of quality products includes CB Radios •...
  • Page 19 For Products Purchased in the U.S.A. Cobra Electronics Corporation warrants that its Cobra GMRS radios and charger, and the component parts thereof, will be free of defects in workmanship and materials for a period of one year from the date of first consumer purchase.

This manual is also suitable for:

Microtalk 6000 wxMicrotalk li 6000 wxc

Table of Contents