Atx Power - SOYO SY-K7VIA User Manual

Hardware Installation
2-3.3.7 ATX Power Supply
Plug the connector from the power directly into the 20-pin male ATX PW
connector on the Motherboard, as shown in the following figure.

ATX Power

Warning: Follow these precautions to preserve your
Motherboard from any remnant currents when connecting to
power supply:
Turn off the power supply and unplug the power cord of the
power supply before connecting to PW connector.
This motherboard requires a power supply, that meets the ATX 2.03
specifications. Make sure the power supply can support at least 720mA on
the 5V Standby lead.
40
SY-K7VIA
®