SOYO SY-K7VIA User Manual page 43

Hardware Installation
5. CD Line-in (CDIN1,CDIN2)
This Motherboard provides two CD-Line in connectors. Please connect the
4-pin audio cable from your CD-ROM drive to either CDIN1 or CDIN2.
(It fits in only one, depending on the cable that came with your CD-ROM
drive)
Please install according to the following pin assignment:
2-3.3.6 AGP VGA Card
Insert the AGP VGA card into the AGP slot. Then connect the monitor
information cable to the AGP card back plane external connector.
Follow the manufacturer's instructions to perform the AGP VGA drivers
installation.
Other Display Cards: Insert other types of VGA cards into the PCI or
ISA expansion slots according to card specifications.
CDIN1,CDIN2(CD Line-in)
Pin Assigment
1
Right
CDIN1
GND
GND
Left
CDIN2
GND
Right
2 3 4
GND
Left
4
3
2
1
39
SY-K7VIA