Konica Minolta Di1610fp User Manual page 42

3.3 Parts Names and Their Functions
No. Part Name
3 Front Cover
4 Bypass Tray
5 Tray1 door
6 Copy Tray
7 Tray1
8 Control Panel
9 Exposure Lamp
10 Original Scales
11 Power Switch
12 External telephone jack
(TEL PORT)
13 Telephone line jack for
line 1 (LINE PORT 1)
14 USB Port
15 Parallel Port
16 Fuser Cover
Di1610fp
Description
Open when replacing the Toner Cartridge or Drum Cartridge, or
clearing a paper misfeed. (p. 8-5)
Use for manual feeding of paper.
Holds up to 10 sheets of paper.
Special paper can be used. (p. 3-28)
If Legal-size paper is installed, open this door.
Holds copies fed out face down from the machine.
The Copy Tray can be adjusted to one of three angles. Adjust the Copy
Tray to the angle appropriate for its application. (p. 3-8)
Holds up to 250 sheets of paper and easily adjusts to different paper
sizes.
Special paper can be used. (p. 3-22)
Use to start a print cycle and make necessary settings. (p. 3-10)
This lamp irradiates the document when it is scanned. The time until the
exposure lamp goes off can be specified. For details on specifying the
setting, refer to "Selecting the "MACHINE SETTING" menu" on
page 7-4.
Use to align the original. (p. 3-32)
Use to turn the machine on and off. (p. 3-15)
Used for connecting a line to a telephone.
Used for connecting to a standard telephone line.
For details, refer to the User Manual for the printer controller.
For details, refer to the User Manual for the printer controller.
Not used
3
3-5