Utility Mode - Konica Minolta Di1610fp User Manual

7
7.1

Utility Mode

There are fifteen menus in the Utility mode.
No. Name
1 MACHINE SETTING
2 PAPER SOURCE
SETUP
3 USER MANAGEMENT
4 ADMIN.MANAGEMENT
5 COPY SETTING
6 FAX REGISTRATION
7 TX OPERATION
8 RX OPERATION
9 COMM. SETTING
10 REPORTING
11 INITIAL USER DATA
12 NETWORK SETTING
13 E-MAIL SETTING 1
14 E-MAIL SETTING 2
15 SCAN SETTING
7-2
Description
Used to specify settings for the machine's operating environment.
Used to specify the size and type of paper loaded in Tray1. In addition,
auto tray switching can be enabled for each tray.
Used to specify settings after the drum cartridge is replaced.
Used to specify setting for the administrator.
Used to specify the default settings for each copy function.
Used to specify the default setting for each fax function.
Used to specify the default setting for TX operation.
Used to specify the default setting for RX operation.
Used to specify the default setting for communicating environment.
Used to specify the default setting for each report function.
Used to specify setting for the initializing user data.
Available only if the optional Network Interface Card NC-5 is installed.
For details, refer to the User Manual for the Network Interface Card
(NC-5).
Available only if the optional Internet Fax & Network Scan Kit SU-6 is
installed. For details, refer to the User Manual for the Internet Fax &
Network Scan Kit (SU-6).
7.1 Utility Mode
Di1610fp