Edited Recording On Sides A And B Of A Tape - Denon UD-M31 Operating Instructions Manual

ENGLISH
Automatic search reverse button (
CD RECEIVER UD-M31
ON / STANDBY
(5) Moving ahead to the next track during playback ......................................................
Press the automatic search forward button (
(6) Moving back to the beginning of the track during playback .......................................
Press the automatic search reverse button (
(7) Finding a certain spot on the disc while listening to the sound .................................
(Using the remote control unit)
• Use this function to skip through the disc while listening to the sound.
• When the desired spot is reached using the skip monitor function, release the manual search forward button (
manual search reverse button ( ) to resume normal playback from that point.
6
Manual search reverse button (
q q Forward skip monitor
(Using the remote control unit)
During playback, press and hold in the manual search forward button (
direction while listening to the sound.
• The track currently being monitored and the elapsed time for that track are indicated on the display.
• If the manual search forward button is held in until the end of the disc is reached, the stop mode is set.
w w Reverse skip monitor
(Using the remote control unit)
During playback, press and hold in the manual search reverse button (
direction while listening to the sound.
• The track currently being monitored and the elapsed time for that track are indicated on the display.
• If the manual search reverse button (
the disc. Release the manual search reverse button (
18
8 ) Automatic search forward button (
BAND
- +
MENU / SET
TONE/SDB
VOLUME
FUNCTION
PHONES
).
9
8 ).
SYSTEM
TITLE/CHARACTER TIME POWER
EDIT
RANDOM SLEEP
TUNING TUNING
) Manual search forward button (
6
RDS
ENTER
MEMORY
REPEAT FUNCTION
TONE /SDB
TUNER
PTY PRESET
- +
PROG /
DIRECT BAND
CD-R MD
GROUP
CT
VOLUME
) to skip through the disc in the forward
7
6 ) to skip through the disc in the reverse
6 ) is pressed continuously, it will reach the beginning of the first track on
) to resume normal playback.
6
(8) Playing the tracks in random order ........................................................................
9 )
(Using the remote control unit)
• Use this function to play all the tracks on the disc once
in random order.
• In the normal playback mode, simply press the
RANDOM button to set random playback.
• If the RANDOM button is pressed while the repeat
mode is set, the tracks are each played once in
random order, then played again in another order,
and so on.
• The repeat mode is set to the all-track repeat mode
when the RANDOM button is pressed during single-
track repeat mode.
Quick Search
NOTES:
• The total remaining time cannot be displayed during the random playback mode.
• The random playback mode cannot be set during editing.
Quick Search
This function allows edited recording according to the length of the tape. (This operation is only possible from the
remote control unit.)
Skip Monitor
Edited recording is a system function of the D-M31 series. This function can only be used in combination with the DRR-
M31.
• Use this function to efficiently edit the tracks on a CD according to the length (time) of the tape onto which you want
7 ) or to record.
NOTES:
• Load a blank cassette tape onto which you want to record in the cassette deck with side A on the top before
starting the editing procedure. The tape is automatically wound to the beginning before recording starts.
• The editing mode is canceled when the CD receiver's stop button is pressed.
• Note that even if the tape is slightly longer than the disc's total playing time, it may not be possible to record all
the tracks on sides A and B because of the combination of tracks to be recorded on the different sides of the tape.
)
7
• When recording on an already recorded tape, if the tape is longer than the new recording, the previous recording
will remain at the end of side B, so erase the tape before starting.
• During edited recording, only the stop button, power operation switch, and TIME button for the CD player section
and the stop button and power operation switch for the cassette deck will function.
• Set the reverse mode on the cassette deck (DRR-M31) to
• Edited recording does not function when you play a disc with more than 26 tracks.
(1) Recording the tracks in the same order as on the disc................................................
CD RECEIVER UD-M31
ON / STANDBY
RANDOM button

Edited Recording on Sides A and B of a Tape

or during edited recording.
Automatic Edited Recording
2, 3 5
BAND
- +
MENU / SET
TONE/SDB
VOLUME
FUNCTION
PHONES
1
Random Playback
SYSTEM
POWER
TITLE/CHARACTER TIME
EDIT
RANDOM SLEEP
TUNING TUNING
RDS
ENTER
MEMORY
REPEAT FUNCTION
TONE /SDB
TUNER
PTY PRESET
- +
PROG /
DIRECT
BAND
GROUP CD-R MD
CT
VOLUME
DISC
SKIP
CD
1 2 3
DISPLAY
CALL
SYSTEM
TITLE/CHARACTER TIME POWER
4
EDIT
RANDOM SLEEP
TUNING TUNING
RDS
ENTER
MEMORY
REPEAT FUNCTION
TONE /SDB 1
TUNER
PTY PRESET
- +
PROG /
DIRECT
BAND
CD-R MD
GROUP
CT
VOLUME
5
DISC
SKIP
CD
1 2 3
CALL DISPLAY
4 5 6
4
PANEL
7 8 9
CLEAR
10 +10