Ipod; Connecting A Power Amp And Subwoofer; Connecting The Recording Components; Cd Recorder / Md Recorder / Tape Deck - Denon RCD-CX1 Owner's Manual

ENGLISH

iPod

®
Use a DENON control dock for iPod (ASD-1R, ASD-11R or ASD-3N/3W,
sold separately) to connect the iPod to the RCD-CX1.
iPod
R L
R L
• When using a control dock for iPod, the Control Dock for iPod must
be set. For details, refer to the operating instructions of the Control
Dock for iPod.
• When the control dock for iPod is connected, the function indicator
switches from "LINE1" to "iPod".
• To use an iPod, see "iPod ® Playback" (vpage 18).

Connecting a Power Amp and
Subwoofer
Use when adding a power amp, subwoofer, etc.
Power amp /
Subwoofer
L R
L R
NOTE
DO NOT insert a short pin plug for recording output (REC) and pre-out
terminals, as this may result in damage.
Connecting the Recording
Components

CD Recorder / MD Recorder / Tape Deck

Analog connections Digital connections
CD recorder /
MD recorder / CD recorder /
Tape deck MD recorder
R R
L L
L R L R
No digital signals are output for Super Audio CDs.
n When connecting the optical digital output connector
with an optical transmission cable (sold separately)
Protective cap Match the shapes
Remove the protective cap, match the shapes, then insert firmly all
the way in.
Store the protective cap in a safe place so as not to lose it, and use it
when not using the terminal.