To Remove Your Setup Password - Acer Altos 330 Series User Manual

7. Press Yes to save your settings and exit Setup Utility. Your password will be
saved to CMOS.
For the password to take effect you must set jumper JP3 to 1-2 (Check password):
1. Turn off and unplug the computer.
2. Open the computer housing and set JP3 to 2-3 (Bypass password) to bypass
the password function. See figure 1-2 for the location of JP3.
3. Close your computer's housing and reboot your system.
The next time you want to enter the BIOS utility, you must key in your Setup
password.

To remove your Setup Password:

1. Disabled the Setup Password parameter in the System Security menu by
pressing the
2. Press to return to the System Security menu and then press
exit Setup. The Exit Setup screen appears:
Settings have been changed.
Do you want to save to CMOS settings?
3. Press Yes to save your settings and exit Setup Utility.
password will be removed from CMOS.
or arrow key to select None.
Exit Setup
[Yes] [No]
Your
Chapter 2 - BIOS Utility 2-37
again to
previous