Scsiselect Configuration Utility; Overview; Default Values; Default Settings For Scsi Controller And All Devices - Acer Altos 330 Series User Manual

3.2

SCSISelect Configuration Utility

3.2.1

Overview

The SCSISelect configuration utility allows you to change SCSI controller settings
without opening the computer or changing jumpers.
3.2.2

Default Values

Table 3-1 lists the settings you can change with the SCSISelect utility and the
default value for each setting. Some settings apply globally to the SCSI controller
and all SCSI devices on the bus; other settings apply individually to each device
on the bus.
Table 3-1

Default Settings for SCSI Controller and All Devices

Global Settings for SCSI Controller and All Devices
Host Adapter SCSI ID
SCSI Parity Checking
Host Adapter SCSI Termination
Boot Device Option
Reset SCSI Bus at IC Initialization
1
Host Adapter BIOS
Support Removable Disks Under BIOS as Fixed Disks
Extended BIOS Translation for DOS Drives > 1 Gbyte
Display <Ctrl-A> Message During BIOS Initialization
Multiple Lun Support
BIOS Support for Bootable CD-ROM
BIOS Support for Int13 Extensions
Support for Ultra SCSI Speed
Individual Settings for Each SCSI Device
Initiate Sync Negotiation
Maximum Sync Transfer Rate
Enable Disconnection
Initiate Wide Negotiation
Send Start Unit Command
Include in BIOS Scan
1
Settings are valid only if host adapter BIOS is enabled.
2
Do not change this setting from the default.
AcerAltos 330 Series User's Guide
3-4
1
Default Value
7
Enabled
Enabled
0 (zero)
Enabled
Enabled
Boot only
2
Enabled
Enabled
Disabled
Enabled
Enabled
Enabled
Default Value
Yes
40 MBytes/sec.
Yes
Yes
No
Yes