Floppy Drive B; Ide Primary Channel Master; Ide Primary Channel Slave; Ide Secondary Channel Master - Acer Altos 330 Series User Manual

2.2.6

Floppy Drive B

This parameter specifies the system's current diskette drive B settings. For
information on how to configure the floppy drives, see section 2.4.1.
2.2.7

IDE Primary Channel Master

This parameter specifies the current configuration of the IDE device connected to
the master port of the primary IDE channel. For information on how to configure
the IDE drives, see section 2.4.2.
2.2.8

IDE Primary Channel Slave

This parameter specifies the current configuration of the IDE device connected to
the slave port of the primary IDE channel. For information on how to configure
the IDE drives, see section 2.4.2.
2.2.9

IDE Secondary Channel Master

This parameter specifies the current configuration of the IDE device connected to
the master port of the secondary IDE channel. For information on how to
configure the IDE drives, see section 2.4.2.

2.2.10 IDE Secondary Channel Slave

This parameter specifies the current configuration of the IDE device connected to
the slave port of the secondary IDE channel. For information on how to configure
the IDE drives, see section 2.4.2.
AcerAltos 330 Series User's Guide
2-6