Table of Contents
Advertisement
1.
Stay alert. Watch what you are doing, and use common sense when operating an
air tool. Do not use an air tool while tired or under the influence of drugs, alcohol, or
medication. A moment of inattention while operating air tools may result in serious
personal injury.
2.
Dress properly. Do not wear loose clothing or jewelry. Contain long hair. Keep
your hair, clothing, and gloves away from moving parts. Loose clothes, jewelry, or
long hair can be caught in moving parts.
3.
Avoid accidental starting. Be sure the Power Switch (45) is in its "STOP" position, all
pressure is safely released, and the unit is unplugged before moving the Compressor
and before performing any service, maintenance, or cleaning procedures on the
unit.
4.
Remove adjusting keys or wrenches before turning the Compressor on. A wrench
or a key that is left attached to a rotating part of the machine may result in personal
injury.
5.
Do not overreach. Keep proper footing and balance at all times. Proper footing
and balance enables better control of the air tool in unexpected situations.
6.
1.
Do not force the tool. Use the correct tool for your application. The correct tool will
do the job better and safer at the rate for which it is designed.
2.
Do not use the Compressor if the Compressor's Power Switch (45) does not turn it
on or off. Any tool that cannot be controlled with its Pressure Switch is dangerous
and must not be used until repaired.
3.
Store idle tools out of reach of children and other untrained persons. Tools are
dangerous in the hands of untrained users.
4.
Maintain tools with care. Properly maintained tools are less likely to bind and are
easier to control. Do not use a damaged tool. Tag damaged tools "Do not use"
until repaired.
5.
Check for misalignment or binding of moving parts, breakage of parts, and any other
condition that may affect the tool's operation. If damaged, have the tool serviced
before using. Many accidents are caused by poorly maintained tools.
6.
Use only accessories that are recommended by the manufacturer for your model.
Accessories that may be suitable for one tool may become hazardous when used
on another tool.
SKU 97080
For technical questions, please call 1-800-444-3353.
PERSONAL SAFEtY
Use safety equipment. Always wear ANSI-approved safety impact
glasses, dust mask/respirator and hearing protection during use.
tOOL uSE ANd CARE
Page 3
Hide quick links:
Advertisement
Table of Contents
