Work Area; Electrical Safety; Personal Safety - Central Pneumatic 60328 Owner's Manual And Safety Instructions

Delayed or inadequate cleaning will permanently clog the Airbrush.

Work Area

a. keep the work area clean and well lighted.
Cluttered benches and dark areas
increase the risks of electric shock,
fire, and injury to persons.
b. Do not operate the Compressor in
explosive atmospheres, such as in the
presence of flammable liquids, gases or
dust. Compressor motors produce sparks
which may ignite the dust or fumes.

Electrical Safety

a. Compressor plugs must match
the outlet. never modify the plug
in any way. Do not use any adapter
plugs with grounded Compressors.
Standard plugs and matching outlets
will reduce risk of electric shock.
b. Do not expose Compressor to rain or wet
conditions. Water entering a Compressor
will increase the risk of electric shock.

personal Safety

a. Stay alert. Watch what you are
doing and use common sense when
operating the tool. Do not use the
tool while tired or under the influence
of drugs, alcohol, or medication.
A moment of inattention while operating the
tool increases the risk of injury to persons.
b. Do not overreach. keep proper
footing and balance at all times.
Proper footing and balance enables better
control of the tool in unexpected situations.
Compressor use and Care
a. Do not use the Compressor if the
switch does not turn it on and
off. Any Compressor that cannot
be controlled with the switch is
dangerous and must be repaired.
Item 60328
Notice
Clean the Airbrush IMMEDIATELY after use.
For technical questions, please call 1-800-444-3353.
c. keep bystanders, children, and
visitors away while operating the tool.
Distractions are able to result in
the loss of control of the tool.
c. Do not abuse the cord. never
use the cord for unplugging the
Compressor. keep cord away from
heat, oil, sharp edges or moving
parts. Damaged or entangled cords
increase the risk of electric shock.
c. prevent unintentional starting.
Ensure the switch is in the off-position
before connecting to power source
or moving the Compressor.
d. use safety equipment. Wear a
NIOSH-approved respirator
during use.
e.
Always wear eye protection.
Wear ANSI-approved
safety goggles.
b. Disconnect the Compressor from
the power source before making any
adjustments, changing accessories,
or storing. Such preventive safety
measures reduce the risk of starting
the Compressor accidentally.
Page 3