Central Pneumatic 97080 Set Up And Operating Instructions Manual page 6

Improperly connecting the grounding wire can result in the risk of electric shock.
Check with a qualified electrician if you are in doubt as to whether the outlet is
properly grounded. do not modify the power cord plug provided with the tool.
Never remove the grounding prong from the plug. do not use the tool if the
power cord or plug is damaged. If damaged, have it repaired by a service facility
before use. If the plug will not fit the outlet, have a proper outlet installed by a
qualified electrician.
GROuNdEd tOOLS: tOOLS WIth thREE PRONG PLuGS
1. Tools marked with "Grounding Required" have a three wire cord and three prong
grounding plug. The plug must be connected to a
properly grounded outlet. If the tool should
electrically malfunction or break down, grounding
provides a low resistance path to carry electricity
away from the user, reducing the risk of electric
shock. (See 3-Prong Plug and Outlet.)
2. The grounding prong in the plug is connected
through the green wire inside the cord to the
grounding system in the tool. The green wire in the
cord must be the only wire connected to the tool's
grounding system and must never be attached to an electrically "live" terminal.
(See 3-Prong Plug and Outlet.)
3. Your tool must be plugged into an appropriate outlet, properly installed and grounded
in accordance with all codes and ordinances. The plug and outlet should look like
those in the following illustration. (See 3-Prong Plug and Outlet.)
SKU 97080 For technical questions, please call 1-800-444-3353.
GROuNdING
WARNING!
3-Prong Plug and Outlet
Page 6