Specific Safety Rules And Precautions - Central Pneumatic 97080 Set Up And Operating Instructions Manual

Tool service must be performed only by qualified repair personnel. Service or
1.
maintenance performed by unqualified personnel could result in a risk of injury.
2. When servicing a tool, use only identical replacement parts. Follow instructions
in the "Inspection, Maintenance, And Cleaning" section of this manual. Use of
unauthorized parts or failure to follow maintenance instructions may create a risk
of electric shock or injury.

SPECIFIC SAFEtY RuLES ANd PRECAutIONS

1. CAutION!
the Air Compressor using its Handle.
2. Do not expose to a high-dust environment. Dusty conditions may increase wear on
the Compressor.
3. dANGER! This Air Compressor is NOT equipped and should not be used "as-is"
to supply breathing air. For any application of air for human consumption, you
must fit the Air Compressor with suitable in-line safety and alarm equipment (not
included). This additional equipment is necessary to properly filter and purify the air
to meet minimal specifications for Grade D breathing as described in Compressed
Gas Association Commodity Specification G 7.1-1966, OSHA 29 CFR 1910. 134,
and/or Canadian Standards Associations (CSA). In the event the Air Compressor
is used for the purpose of breathing air application and proper in-line safety and
alarm equipment is not simultaneously used, existing warranties are void, and
Harbor Freight Tools disclaims any liability whatsoever for any loss, personal injury,
or damage.
4. dANGER!
or any other modification will weaken the Tank resulting in damage from rupture or
explosion. Always replace worn, cracked, or damaged Tanks.
5. Maintain labels and nameplates on the Air Compressor. These carry important
information. If unreadable or missing, contact Harbor Freight Tools for a
replacement.
6. WARNING!
could result. Any tube, pipe, or hose used must have a pressure rating higher than
150 PSI. Minimum recommended pipe size: Up to 50 feet long use 1/2" diameter.
Greater than 50 feet use 3/4" diameter. Larger diameter pipe is always better.
7. Make sure all tools and equipment used with the Air Compressor are rated to the
appropriate capacity. Do not use any tool or equipment that does not operate from
85 PSI to 100 PSI.
SKU 97080 For technical questions, please call 1-800-444-3353.
Your Warranty is voided if: You drop the Air Compressor. Always lift
Never attempt to repair or modify the Air Tank (53). Welding, drilling,
Never use plastic (PVC) pipe for compressed air; serious injury or death
SERVICE
Page 4