Wheels; Disk Brake; Brake Bowden Cable - Invacare Meteor Service Manual

Invacare
®
7.4

Wheels

ü
NOTE:
Disassembly of wheels and repair of tyres is described in the operating manual.
7.5

Disk brake

7.5.1

Brake Bowden cable

Disassembly
1. Dismantle the operating console (see section 7.2.2).
2. Dismantle the rear steering column panelling (see
section 7.2.3).
3. Dismantle the rear panelling (see section 7.3.3).
4. Note down the Bowden cable route (sketch).
5. Loosen the Bowden cable clamp Allen screw at the
brake saddle.
6. Loosen the brake Bowden cable union nut.
7. Twist the Bowden cable nut out of the brake saddle.
8. Loosen the union nut on the Bowden cable at the
handle.
9. Twist the Bowden cable nut out of the handle.
10. Mark the cable binder positions along the brake
Bowden cable route and release them.
11. Remove brake Bowden cable.
Reassembly
1. Reassembly takes place in reverse order to disas-
sembly.
2. Adjust brake Bowden cable.
34
Meteor
Service Manual