Brake Calliper; Brake Disc - Invacare Meteor Service Manual

Service Manual
7.5.2

Brake calliper

Caution:
Before starting work, lay the vehicle down on its side on a relatively
firm underlay, or block up the frame so that the steering wheels are not
loaded.
Disassembly
1. Dismantle the brake Bowden cable (see section
7.5.1).
2. Loosen the Allen screws at the brake calliper and
remove them together with washers.
3. Pull the brake calliper off the brake disc.
Reassembly
1. Push the brake calliper back over the brake disk.
2. Bolt to the brake calliper to the chassis with Allen
keys and washers.
3. Fit the brake cable and adjust.
7.5.3

Brake disc

Caution:
Before starting work, lay the vehicle down on its side on a relatively
firm underlay, or block up the frame so that the steering wheels are not
loaded.
Disassembly
1. Dismantle drive wheel (see section 7.4).
2. Dismantle brake calliper (see section 7.5.1).
3. Remove distance ring and brake disk from the axle.
Reassembly
1. Fit the brake disk to the drive wheel on the right.
Invacare
®
Meteor
35