The Image Processor Board - Tektronix Phaser 600 Service Manual

1
General Information

The image processor board

Prominent on the image processor board is the ROM code SIMM and the RAM
SIMM plug-in modules. Network connection is provided through the plug-in
network card. The printer stores unique printer status and PostScript values in
its NVRAM module. The printer's IP address, unique to each printer, is stored
in a socketed ROM IC.
PhaserShare Card
Printer ID ROM
NVRAM
FPGA ROM
PostScript ROM SIMM
RAM SIMM 2
Extended Feature SIMM
RAM SIMM 1
9482-07
Figure 1-7 Features of the image processor board
RAM SIMM 1 must always be a 8 Mbyte RAM SIMM. RAM SIMM 2 can be
either a 16 Mbyte RAM SIMM or a 32 Mbyte RAM SIMM.
Service Manual 1-9