Table of Contents
Advertisement
Setting interval type
You can select four optional types of intervals:
A. Time-based interval
Ends your interval when you have used
the preset time.
B. Heart-rate-based interval
Ends your interval as you reach the
preset heart rate. When selecting heart-
rate-based interval, recovery calculation
must be set on.
C. Distance-based interval
Ends your interval as you reach the
selected distance.
D. Manual interval
End the interval training session
by pressing OK.
If you start from the Time of day display, repeat steps 1-5.
6. Scroll up or down until Interval TIMER/ Hr/ DIST/ MANUAL is
displayed. Press OK to start setting the interval type.
TIMER/ Hr/ DIST/ MANUAL is flashing.
7. Scroll up or down to select the interval type that will be used to end the
interval. Press OK. If you chose manual interval skip steps 8 - 9.
S710 man GBR/B .pm6
26-27
A. Time-based interval
8. Scroll up or down to adjust minutes. Press OK.
9. Scroll up or down to adjust seconds. Press OK. Interval TIMER appears.
Or
B. Heart-rate-based interval
8. Scroll up or down to adjust the heart rate that will end your interval.
Or
C. Distance-based interval
8. Scroll up or down to adjust kilometres.
9. Scroll up or down to adjust hundreds of
Setting the number of intervals
If you start from the Time of day display, repeat steps 1-5.
You can set up to 30 intervals.
6. Scroll up or down until Repeat is displayed.
7. Press OK to start setting the number of intervals.
8. Scroll up or down to adjust the number of intervals. Press OK.
Or
If you do not know in advance the precise amount of the desired intervals,
select continuous interval. The intervals will succeed until you manually
stop the interval phase or until 30 intervals have been made.
8. Scroll down until Cont
B 26
Press OK. Interval Hr appears.
Press OK.
metres. Press OK.
appears. Press OK.
B 27
23/4/01, 15:59
Units 2: Adjustable units
are miles and feet.
Advertisement
Table of Contents
