Using The Power Tools Scantool; Aiming Beam - Honeywell Dolphin 70e Black User Manual

Using the Power Tools ScanTool

Note: Detailed information on the ScanTool Power Tool is provided in the Dolphin Power Tools for Mobile Devices
Powered by Android™ User's Guide, available for download at www.honeywellaidc.com.
1. Touch > Power Tools
2. Touch one of the Quick Start applications.
Quick Start Application
Activity result
Show result
Send via SMS
Send via MMS
Send via email
Send to application
Settings
About
3. The device automatically scans and decodes the bar code when the application is selected.
Symbology Settings Menu
1. Touch the > Power Tools
2. Touch the box next to the symbology name to toggle the symbology on (enable) or off (disable). A
green check mark indicates the symbology is enabled.
Note: Swipe up or down with your finger or stylus on the screen to scroll up or down the list of available
symbologies.
3. Touch the arrow box to view and modify the advanced settings (e.g. suffix, prefix, minimum and
maximum length) for the symbology.

Aiming Beam

The aiming beam is smaller when the terminal is held closer to the code and larger when it is farther
from the code. Symbologies with smaller bars or elements (mil size) should be read closer to the unit
whereas symbologies with larger bars or elements (mil size) should be read farther from the unit.
Linear Bar Code.
4 - 6
> ScanTool
Description
Scan and decode bar codes
Scan, decode, and view the results (i.e., bar code type and value)
Scan, decode, and send the results via SMS
Scan, decode, and send the results via MMS
Scan, decode, and email the results
Quick start an application by scanning a barcode
Modifies the imager symbology settings
Displays ScanTool version and copyright information
> ScanTool
.
> Settings.