Chapter 2 - Getting Started; Out Of The Box; Memory Card Specifications; Initial Setup For Dolphin 70E Black Terminal - Honeywell Dolphin 70e Black User Manual

2
Getting Started

Out of the Box

Verify that the carton contains the following items:
• Dolphin 70e Black mobile computer (terminal)
• 1 GB, 2 GB or 4 GB microSD™ Memory Card (pre-installed)
• 3.7V Li-ion rechargeable battery
• USB charge/communication cable
• Power adapter with regional plug adapters
• Quick start guide
• Compliance Regulatory Sheet
If you ordered accessories for your terminals, verify that they are also included with the order. Be sure to
keep the original packaging in the event that the Dolphin terminal should need to be returned for service.
Note: Your Dolphin model may differ from the model illustrated in this guide; however, the features noted are
standard for all Dolphin 70e Black models powered by Android™ unless otherwise indicated.

Memory Card Specifications

Applications on your Dolphin 70e Black terminal utilize the memory card to store files and application
data. A microSD memory card is included and pre-installed in the device. Memory card use is
recommended to avoid potential application errors or possible data loss.
Honeywell recommends the use of Single Level Cell (SLC) industrial grade microSD or microSDHC™
memory cards with Dolphin terminals for maximum performance and durability. Contact a Honeywell
sales representative for additional information on qualified memory card options.

Initial Setup for Dolphin 70e Black Terminal

Step 1. Install the Battery
Note: Before installing the main battery, read the
Dolphin 70e Black model terminals are designed for use with battery part numbers BAT-STANDARD-01
(Li-ion 3.7V, 6.179 watt hour) and BAT-EXTENDED-01 (Li-ion 3.7V, 12.358 watt hour) manufactured for
Honeywell International Inc.
The terminal is shipped with the battery packaged separate from the unit. Perform the steps illustrated
on page 2-2 to install the battery pack. For information on how to remove the battery, see
Battery on page 2-13.
Ensure all components are dry prior to placing the battery in the terminal. Mating wet components may cause
damage not covered by the warranty.
Guidelines for Battery Pack Use and Disposal on page 3-13.
Replacing the
2 - 1