Zanussi ZWS 3101 User Manual page 21

• On the edge of a sink.
Make sure that the plastic guide cannot
move when the appliance drains. Attach
the guide to the water tap or the wall.
• To a stand pipe with vent-hole.
Refer to the illustration. Directly into a drain
pipe at a height of not less than 60 cm and
not more than 90 cm. The end of the drain
hose must always be ventilated , i.e. the in-
ner diameter of the drainpipe must be larg-
er than the external diameter of the drain
hose.
www.zanussi.com
Without the plastic hose guide
• To a sink spigot.
Refer to the illustration. Put the drain hose
in the spigot and tighten it with a clip. Make
sure that the drain hose makes a loop to
prevent that remaining particles go in the
appliance from the sink.
• Directly to a built-in drain pipe in the room
wall and tighten it with a clip.
21