Zanussi ZWS 3101 User Manual page 19

6. Remove the polystyrene protection from
the bottom.
7. Install the plastic cover (A), removed from
the top of the packaging, to the bottom
of the appliance. Remove the adhesive
strip and close the bottom of the appli-
ance. Attach permanently the plastic cov-
er to the bottom of the appliance with the
small plastic caps that you can find in the
user manual bag.
8. Pull up the appliance in vertical position.
www.zanussi.com
1
2
9. Remove the four bolts with a key. Pull out
A
10. Put the plastic caps in the holes. You can
appliance.
move the appliance.
the plastic spacers. Remove the power
supply cable and the drain hose from the
hose holders.
find these caps in the user manual bag.
Warning! Remove all the packaging and
the transit bolts before you install the
We recommend that you keep the packag-
ing and the transit bolts for when you
2
1
19