Advertisement

User manual
EN
Washing Machine
ZWS 688

Advertisement

Table of Contents
loading

Summary of Contents for Zanussi ZWS 688

  • Page 1 User manual Washing Machine ZWS 688...
  • Page 2: Table Of Contents

    • If the appliance has a child safety device, we recommend you acti- vate it. General Safety • Before maintenance, deactivate the appliance and disconnect the mains plug from the mains socket. • Do not change the specification of this appliance. www.zanussi.com...
  • Page 3: Safety Instructions

    Electrical connection • The appliance is to be connected to the wa- Warning! Risk of fire and electrical shock. ter mains using the new supplied hose-sets. Old hose sets must not be reused. • The appliance must be earthed. www.zanussi.com...
  • Page 4 • Make sure that you remove all metal objects • Remove the door catch to prevent children from the laundry. and pets to get closed in the appliance. • Do not put a container to collect possible wa- ter leakage under the appliance. Contact the www.zanussi.com...
  • Page 5: Product Description

    Follow the instructions supplied with the kit. sary use a coin. tical. Child safety Make sure that children or pets do not climb in- to the drum. To prevent children and pets be- coming trapped inside the drum this machine in- corporates a special feature. www.zanussi.com...
  • Page 6: Control Panel

    These are presented by relevant numbers on the following pages. Programme selector dial Table of symbols SPIN reduction button Cold water OPTIONS button No spin EXTRA RINSE button Rinse Hold START/PAUSE button DELAY START button Indicator pilot lights www.zanussi.com...
  • Page 7: First Use

    • Remove the polystyrene block and any ature without any laundry in the machine, material from the drum. to remove any manufacturing residue from the drum and tub. Pour 1/2 a www.zanussi.com...
  • Page 8: Daily Use

    5 flashes for 3 times. partment marked (the amount used must For the compatibility among the washing not exceed the «MAX» mark in the drawer). programmes and the options see chapter Close the drawer gently. «Washing Programmes». www.zanussi.com...
  • Page 9: Helpful Hints And Tips

    Remove persistent stains before washing. Before loading the laundry Rub particularly soiled areas with a special de- Never wash whites and coloureds together. tergent or detergent paste. Whites may lose their «whiteness» in the wash. www.zanussi.com...
  • Page 10: Detergents And Additives

    If the water hardness degree is ronment. medium or high we suggest you to add a water softener following always the manufacturer’s in- 1) do not use acetone on artificial silk www.zanussi.com...
  • Page 11: Programmes

    Maximum spin speed at 800 rpm PREWASH Max. load 1 kg EXTRA RINSE Synthetic or mixed fabrics The laundry is gently washed and spun to avoid any creas- ing. In this way ironing is easier. Furthermore the machine will perform additional rinses. www.zanussi.com...
  • Page 12 3 rinses, followed by a final long spin. The spin speed can be reduced. DRAIN Draining of water Max. load 6 kg For emptying out the water of the last rinse in programmes with the Rinse Hold option selected. www.zanussi.com...
  • Page 13: Consumption Values

    Before the machine is not working. contacting your local Service Centre, please It is possible to recognize the fault machine by carry out the checks listed below. the number of button 5 light flashes. If the num- www.zanussi.com...
  • Page 14 The machine does not fill: red light blinks). • Clean the water inlet filters (see ‘Cleaning the water inlet filters’ for more details). The door is not properly closed (the button 5 red light blinks). • Close the door firmly. www.zanussi.com...
  • Page 15 • Check the correct levelling of the appliance. The machine vibrates is noisy: The laundry is not evenly distributed in the drum. • Redistribute the laundry. Maybe there is very little laundry in the drum. • Load more laundry. www.zanussi.com...
  • Page 16: Technical Data

    The water we use normally contains lime. It is a before you can carry out any cleaning or good idea to periodically use a water softening maintenance work. powder in the machine. Do this separately from www.zanussi.com...
  • Page 17 Cleaning the pump The pump should be inspected regularly and particularly if: • the appliance does not empty and/or spin; • the appliance makes an unusual noise during draining due to objects such as safety pins, coins etc. blocking the pump; www.zanussi.com...
  • Page 18 If this does not occur, contact the service centre. tap. • Unscrew the hose from the tap. • Clean the filter in the hose with a stiff brush. • Screw the hose back onto the tap. Make sure the connection is tight. www.zanussi.com...
  • Page 19: Installation

    2. Start the programme to drain the water. hose. Installation Unpacking All transit bolts and packing must be removed before using the appliance. You are advised to keep all transit devices so that they can be refitted if the machine ever has to be transported again. www.zanussi.com...
  • Page 20 Level the washing machine by raising or lowering the feet. The feet may be tight to adjust as they incorporate a self locking nut, but the machine MUST be level and stable. www.zanussi.com...
  • Page 21: Environment Concerns

    By ensuring this product household waste disposal service or the shop is disposed of correctly, you will help prevent where you purchased the product. www.zanussi.com...
  • Page 22 • Measure out detergent according to the wa- Ecological hints ter hardness, the degree of soiling and the To save water, energy and to help protect the quantity of laundry being washed. environment, we recommend that you follow these tips: www.zanussi.com...
  • Page 23 www.zanussi.com...
  • Page 24 www.zanussi.com/shop...

Table of Contents