Burning A Disc (Disc-At-Once) - Sony PS-LX300USB Operating Instructions Manual

6. Click the Start button.
ImPortant:
Clicking
Cance'
alter theeD writing
pro::~~s,kegins
renders the
CO
unusqble.' .' ,
After your audio is written to CD, the CD Operation dialog indicates whether the
writing was successful.
7. Click OK to clear the message.
Closing a CD
Closing the CD allows you to listen to it in an audio CD player. However, you cannot
add tracks to a CD once it is closed.
1. From the Tools menu, choose Burn Track-at-Once Audio CD. The Burn Track-at-
Once Audio CD dialog is displayed.
2. From the Action drop-down list, choose Close Disc.
3. If desired, select the Eject disc when done check box to eject the CD automatically
when the disc has been closed.
4. Click the Start button. The Sound Forge Audio Studio application begins closing
the CD and displays a progress meter in the dialog.
After the CD is closed, the CD Operation dialog indicates whether the closing was
successful.
5. Click OK to clear the message.
Burning a disc (disc-at-once)
You can burn a disc-at-once (DAO) CD using the current CD layout.
Use DAO CDs when you need to create a master disc for mass replication or want to
create a CD without two-second pauses between tracks.
Adding CD track regions to your audio file
1. Arrange your audio files in a data window.
Tip: [fyou wont to burn a CD using audio trom multiple files,. render each project as a
16-bit, 44 kHz wave file, and copy and paste the renderedwciyeJi/esJo a new data
window;" . . . . . .
2. Create a time selection that contains the audio you want to burn to a track and
choose Special> Regions List> Insert (or press R) to create a region for the track.
3. Repeat step 2 for each track. A Red Book CD can contain up to 99 tracks.
361 RECORDING, EXTRACTING, AND BURNING