Recording, Extracting, And Burning; Specifying Recording And Playback Options; Recording Audio; Starting Recording - Sony PS-LX300USB Operating Instructions Manual

Chapter
7~
Recording, Extracting, and Burning
: This chapter describes the processes for recording audio, extracting audio
: from a CD, and writing audio to a CD in Sound Forge'" Audio Studio™
~
software.
Note:
This chapter assumes you have already set up and
conn~Ct;d
your
avdio source to your sound card's inputs.For more information
Oil,
connecting audio sources/please refertoyour sound card's use;
"i,
documentation. For detaileainformcitionon setting up your devices for
recording
withinS~undForge
Audio Studio, please see the onlinebelp. . • •
Specifying recording and playback options
From the Options menu, choose Preferences and select the Audio tab to
specify recording and playback options.
In addition, the Advanced Audio Configuration dialog allows you to view
information about and adjust settings for the playback or recording device
selected on the Preferences window (from the Options menu, choose
Preferences) Audio tab. To view advanced audio preferences, click the
Advanced button.
Recording audio
After you've connected an audio source and verified your recording setup,
you're ready to start recording audio. From the Special menu, choose
Transport, and then choose Record from the submenu (or press Ctrl+R) to
open the Record dialog.
Starting recording
1. From the Special menu, choose Transport, and then choose Record
from the submenu (or press Ctrl+R). The Record dialog is displayed.
2. Choose the destination data window for your recording. By default, the
application records into the active data window.
RECORDING, EXTRACTING, AND BURNING 131