Creating A New Data Window; Copying Data To A New File - Sony PS-LX300USB Operating Instructions Manual

Keyboard scrub
letters
QJ[K][g
Reverse Pause Forward
Press J for reverse playback. Press again to
accelerate the playback rate.
Press L for forward playback. Press again to
accelerate the playback rate.
Press K to pause playback.
There are several ways to adjust the playback speed:
Hold K while pressing
J
or L to emulate a shuttle knob mode.
Press K+L to turn the knob to the left or K+L to turn the knob to the right.
Press K again or Space to return to normal mode.
Scrubbing with the keyboard
Three letters (JKL) are used as a keyboard scrub
control.
Creating a new data window
1. From the File menu, choose New. The New Window dialog is displayed.
2. Complete the New Window dialog:
a. From the Sample rate drop-down list, choose a sample rate.
b. From the Bit-depth drop-down list, choose a bit depth.
c. Choose a setting from the Channels drop-down list to select the number of
channels stored in the file.
For more information, see Editing file attributes on page
21.
3. Click OK. A new data window with the specified attributes is displayed.
Copying data to a new file
You can create new audio files by copying data to a new data window.
1. Open an audio file and create a selection.
2. From the Edit menu, choose Copy. The selection is copied to the clipboard.
Tip: ,You can::also cliCk theCopy
buttqf'rJ~
in the Standard tob/bar.
-~
Jj
3. Create a new data window.
For more information, see Creating a new data window on
page
13.
4. From the Edit menu, choose Paste Special, and then choose Paste to New. The
selected data is pasted in the new data window.
~
.
TIp: You cana/so clickthePaste butto~. in theStandardtoolbar.
GETIING STARTED 113