Sony PS-LX300USB Operating Instructions Manual page 66

When you burn your CD, two seconds of silence will be added before the first CD track.
Subsequent tracks will have silence between them only if space exists between the
track regions.
Notes:
"';.;c·
v;"'i
j'lfyo(J;fifj~CQtrqdctna~Rel"iS n ~tpla~edatih~6¢g(,Jningpfy~~~~bta~ihgcw'
a UClrJO'!$!
, that occurspefore thafmarker will not bebumed to disc.' ' . ..
t;< . ' , " \ , . . . .
'~CD track regions must lJe at/east 4'secondsapart,Use theTiroe Ruler
to
check ma'rker
" spacing. ' . .' . ", '" . '
Burning your disc
1. From the Tools menu, choose Burn CD, and choose Disc-at-Once Audio CD from
the submenu. The Burn Disc-at-Once Audio CD dialog appears.
2. From the Drive drop-down list, use the CD drive that you want to use to burn your
CD.
3. From the Speed drop-down list, choose the speed at which you want to burn. Max
will use your drive's fastest possible speed; decrease the setting to prevent the
possibility of buffer underruns.
4. Select the Buffer underrun protection check box if your CD recorder supports
buffer underrun protection. Buffer underrun protection allows a CD recorder to
stop and resume burning.
5. Choose a radio button in the Burn mode box:
Setting Description
Burn CDs
Test first, then
burn CDs
Begins recording audio to your CD immediately.
Performs a test to determine whether your files can be written to the CD recorder
without encountering buffer underruns. No audio is recorded to the CD during the
test, and recording begins aher the test if it is successful.
Test only (do not Performs a test to determine whether your files can be written to the CD recorder
burn CDs) without encountering buffer underruns. No audio is recorded to the CD.
6. Select the Render temporary image before burning check box if you want to
render your CD project to a temporary file before recording. Prerendering can
prevent buffer underruns if you have a complex project that cannot be rendered
and burned in real time.
Note: The rendered temporary file willremain until you modify your project orexit the
'application: It an imagefile exists when you open the Bum Disc-at-Once Audio CD
dialog, the cfleck box is displayed as
Use existing rendered temporary image.
RECORDING, EXTRACTING, AND BURNING 137