Sony PS-LX300USB Operating Instructions Manual page 10

1
Launch "Sound Forge Audio Studio
LE;' which you have installed from the
supplied CD-ROM.
The Main Window opens automatically.
2
Click the recording button
(i)
in the
Main Window, as shown below.
Click here
The new [Recording] dialog box and Data
Window open.
By default, the new Data Window is
activated. If you want to change Data
Window, open and activate the Data
Window you want to record.
3
Click the [Record] button in the
[Recording] dialog box.
4
Start playback the audio track of the
vinyl record with the turntable.
Before playing a vinyl record, be sure that
the software is in the recording mode.
While recording, you can recognize that the
recording indicator lights in red and blinks
in the [Recording] dialog box.
5
Check that playback of the audio
track is completely finished, then
click [STOP] in the [Recording] dialog
box.
The recorded data is displayed as a
waveform on the Data Window.
6
Click [Close] to close the [Recording]
dialog box.
7
To save the recorded audio track on
your computer, activate the Data
Window you want to save, then select
[Save] from the [File] menu.
8
Enter a filename, then select a file
format from the drop-down list.
9
Select the location you want to save,
then click [Save].
10
To exit from the application, select
[Exit] from the [File] menu.
11
Disconnect the USB cable from the
computer and turntable when you
have finished recording.
Tip
For details about using the software, refer to the "Sound
Forge Audio Studio LE" quick start guide (on the
supplied CD- ROM) or on-line help of the software.
Reference guides for the supplied software
Refer to the following instructions:
• The installation guide for "Sound Forge
Audio Studio LE":
Refer to this supplied manual to install
"Sound Forge Audio Studio LE:'
• The "Sound Forge Audio Studio LE" tutorial:
This tutorial provides easy instructions on
how to operate the software. After installing
the software, the tutorial appears when you
launch the software for the first time.
• The "Sound Forge Audio Studio LE" quick
start guide (on the supplied CD-ROM):
This provides instructions on the basic
operation of the software.