Recording A Vinyl Record; Recording Audio Tracks Onto A Computer - Sony PS-LX310BT Operating Instructions Manual

Recording a Vinyl
Record
Recording Audio Tracks
onto a Computer
You can use a USB cable (not supplied) to
connect your turntable to a computer, and
then record audio tracks from the vinyl
record to your computer.
Note
• You need to install recording software on the
computer to record audio tracks. If no recording
software is installed, you cannot record audio
tracks, even if you connect a computer to your
turntable. Set up any music recording software
(not included). You can also use freeware, such
as Audacity®. Download Audacity from the
following URL.
http://www.audacityteam.org/
Sony does not offer support for this software.
• The USB output signals can be used only for
recording, not for playback.
System requirements
Operating systems:
Windows 7/Windows 8.1/Windows 10
(32/64 bit)
(The latest service pack is required.)
OS X Mavericks (10.9)
OS X Yosemite (10.10)
OS X El Capitan (10.11)
macOS Sierra (10.12)
macOS High Sierra (10.13)
macOS Mojave (10.14)
macOS Catalina (10.15)
Any operating systems other than the listed
ones are not supported.
The standard driver software of Windows
and Mac is supported. No installation of the
dedicated driver software is needed.
Note
A recording application is not assured to work
successfully:
– on every computer with one of the listed
operating systems
– on a homemade computer
– on a computer with a user-upgraded operating
system
– on a multi-boot computer
– with the power-saving features of the computer:
System Suspend or Sleep (Standby)
– on a computer with an operating system for
which support has ended
Connecting to a computer
1
Connect a computer to your
turntable.
To the USB
port
USB cable (not
supplied)
To the USB
port
Computer (not
supplied)
2
Press the power
button on the back of your turntable
to turn on the turntable.
Note
• Be sure to use only the USB cable (not
supplied) when connecting a computer to
your turntable. Do not use a USB hub or a
USB extension cable for connection.
• Be sure to insert the USB cable plug straight
and all the way into the USB port. Do not
force it obliquely into the port as it may
cause malfunctions.
ON/ STANDBY
19