Ninja BL660W Owner's Manual page 3

9. Keep hands, hair, clothing, as well as
utensils out of container while processing
to reduce the risk of severe injury to
persons or damage to the appliance. A
scraper may be used but only when the
appliance is not running.
10. CAUTION: Blade assembly is sharp,
handle with care. When handling the
blade assembly, always hold by the shaft.
11. Avoid contact with moving parts.
12. DO NOT attempt to sharpen blades.
13. DO NOT use the appliance if blade
assembly is bent or damaged.
14. To reduce risk of injury, never place the
blade assembly on base without pitcher
or bowl properly attached.
15. DO NOT operate this appliance on or
near any hot surfaces (such as gas or
electric burner or in a heated oven).
16. The use of attachments or accessories
including canning jars, not
recommended by the manufacturer may
result in fire, electric shock or personal
injury.
17. DO NOT remove the container from
the motor base while the appliance is in
operation.
18. To reduce the risk of injury, NEVER
operate the appliance without the lid
in place; DO NOT try to defeat the
interlock mechanism; make sure that the
attachment is properly installed before
operating the appliance.
19. DO NOT expose containers to extreme
temperature changes.
20. Exercise extreme caution when blending
hot liquids.
21. CAUTION: Do not process food or
liquid that is hotter than 180°F/82°C.
Allow very hot ingredients to cool before
processing.
BL660W_30_IB_ENG_120130_1.indd 2
22. DO NOT overfill.
23. Extreme caution must be used when
moving an appliance containing hot
food, water or other liquids.
24. When processing hot foods or liquids,
always open the pouring spout cap to
vent the steam. Keep hands and other
exposed skin away from the opening
to prevent possible burns or scalding.
25. DO NOT operate the appliance
empty.
26. To reduce the risk of burns, always
allow the appliance to cool after
blending hot liquids before taking off
parts and before cleaning.
27. If the appliance overheats, a thermal
switch will become activated and
shut off the motor. To reset, unplug
the appliance and let it cool down
for approximately 15 minutes before
using again.
28. In the event that the unit overloads,
the control panel lights will flash and
the unit will shut down. Unplug the
unit and wait 15 minutes to reset.
29. THIS PRODUCT IS INTENDED FOR
HOUSEHOLD USE ONLY. Do not use
this appliance for anything other than
its intended use. Do not use outdoors.
30. The maximum rating is based on
the 6-Blade Assembly (pitcher) that
drives the greatest power and other
recommended attachments may draw
significantly less power or current.
WARNING
are not recommended for use with this
product.
SAVE THESE
INSTRUCTIONS
www.ninjakitchen.com
: Extension cords
2
12-01-30 1:57 PM