Assembly And Use For The 40 Oz. Bowl - Ninja BL660W Owner's Manual

Assembly and Use for the 40 oz. Bowl
WARNING: Never leave the appliance unattended while in use.
ASSEMBLY
Fig. 1
USING THE 4-BLADE ASSEMBLY
1
Holding the 4-Blade assembly by the shaft, place it
onto the gear shaft inside the bowl. Ensure that the
attachment fits around the gear shaft and that it is
standing straight.
2
Add the ingredients and secure the bowl lid onto
the bowl. (Fig. 1)
3 Plug the power cord into the electrical outlet and
press on the power button ( ).
NOTE: Please refer to "Speed Settings & Uses"
chart for suggested uses and speeds.
MAXIMUM CAPACITY
40-oz Bowl
Dry - Do not exceed 2 1/2 cups (20 oz.)
Wet - Do not exceed 5 cups (40 oz.)
11 TOLL FREE:
BL660W_30_IB_ENG_120130_1.indd 11
USE
Locking
Tab
1-877-646-5288
Fig. 2
USING THE DOUGH BLADE
IMPORTANT: Use only the "DOUGH" button when
using this attachment.
IMPORTANT: Use the dough station when using
the dough blade on SPEED 1/DOUGH.
1 Place the dough station on a clean, dry, level
surface such as a counter or table top with the
locking tab in the back. (Fig. 2) Press down to
secure the suction feet to the surface.
2 Place the motor base inside the dough station and
push down until you hear it click into place. (Fig. 2)
3 Secure the bowl onto the motor base.
4
Holding the dough blade by the shaft, place it onto
the gear shaft inside the bowl. Ensure that the
attachment fits around the gear shaft and that it is
standing straight.
5 Add the ingredients and secure the bowl lid onto
the bowl. (Fig. 3)
NOTE: For best results add wet ingredients first
and then add dry ingredients.
6 Plug the power cord into the electrical outlet and
press on the power button ( ).
NOTE: Please refer to "Speed Settings & Uses"
chart for suggested uses.
Fig. 3
12-01-30 1:57 PM