Grandstream Networks GXP2130 Administration Manual page 46

Settings -> Broadsoft -> Broadsoft Directories
XSI
GXP2130/GXP2140/GXP2160
FIRMWARE VERSION 1.0.4.10
Similar to Speed Dial but it will dial based on the current active
account. For example, if the phone is offhook and account 2 is active,
it will call the configured Speed Dial number using account 2.

Dial DTMF
Enter a series of DTMF digits in the Value field to be dialed during
the call. "Enable MPK Sending DTMF" has to be set to "Yes" first.

Voice Mail
Select Account and enter the Voice Mail access number in the Value
field.

Call Return
The last answered calls can be dialed out by using Call Return. The
Value field should be left blank. Also, this option is not binding to the
account and the call will be returned based on the account with the
last answered call.

Transfer
Select Account, and enter the number in the Value field to be
transferred (blind transfer) during the call.

Call Park
Select Account, and enter the call park extension in the Value field to
park/pick up the call.

Intercom
Select Account, and enter the extension number in the Value field to
do the intercom.

LDAP Search
This option is to narrow the LDAP search scope. Enter the LDAP
search base in the Name field. It could be the same or different from
the Base in LDAP configuration under Advanced Settings. The Base
in LDAP configuration will be used if the Name field is left blank.
Enter the LDAP Name/Number filter in the Value field.
Configures XSI Directory.

Server
Defines Broadsoft XSI server address with protocol.

Port.
Defines the port of XSI Server.

User name.
Username for Broadsoft XSI server.

Password.
GXP2130/GXP2140/GXP2160
ADMINISTRATION GUIDE
Page 46 of 68