Grandstream Networks GXP2130 Administration Manual page 43

Degree Unit
Enable Currency Update
Currency Code
Settings -> Programmable Keys
Line Key X
GXP2130/GXP2140/GXP2160
FIRMWARE VERSION 1.0.4.10
15 minutes.
Specifies the degree unit for the weather information to display on the
phone.
Configures to enable or disable currency update on the phone. The
default setting is "Yes". If set to "No", the currency information screen will
not show.
Configures currency code for the phone to look up and display the
currency information.
Assigns a function to the corresponding line key. The key mode options
are:

Line
Regular line key to open up a line and switch line. The Value field
can be left blank.

Shared Line
Share line for Shared Line Appearance feature. Select the Account
registered as Shared line for the line key. The Value field can be left
blank.

Speed Dial
Select the Account to dial from. And enter the Speed Dial number in
the Value field to be dialed.

Busy Lamp Field (BLF)
Select the Account to monitor the BLF status. Enter the extension
number in the Value field to be monitored.

Presence Watcher
This option has to be supported by a presence server and it is tied to
the "Do Not Disturb" status of the phone's extension.

Eventlist BLF
This option is similar to the BLF option but in this case the PBX
collects the information from the phones and sends it out in one
single notify message. PBX server has to support this feature.

Speed Dial via active account
Similar to Speed Dial but it will dial based on the current active
account. For example, if the phone is offhook and account 2 is active,
it will call the configured Speed Dial number using account 2.

Dial DTMF
Enter a series of DTMF digits in the Value field to be dialed during
GXP2130/GXP2140/GXP2160
ADMINISTRATION GUIDE
Page 43 of 68