Grandstream Networks GXP2130 Administration Manual page 32

Eventlist BLF URI
Conference URI
Music On Hold URI
BLF Call-pickup Prefix
PUBLISH for Presence
Omit charset=UTF-8 in
MESSAGE
Special Feature
Broadsoft Call Center
Hoteling Event
Call Center Status
Broadsoft Executive
Assistant
Feature Key
GXP2130/GXP2140/GXP2160
FIRMWARE VERSION 1.0.4.10
line-seize event package whenever a user attempts to take the shared line off
hook. "Line Seize Timeout" is the line-seize event expiration timer. The default
value is 15 seconds.
Configures the eventlist BLF URI on the phone to monitor the extensions in the
list with Multi Purpose Key. If the server supports this feature, users need to
configure an eventlist
BLF1006@myserver.com) with a list of extension included. On the phone, in
this "eventlist BLF URI" field, fill in the URI without the domain (i.e., BLF1006).
To monitor the
GUI->Settings->Programmable Keys page, please select "eventlist BLF" in the
key mode, choose account, enter the value of each extension in the list.
Configures the conference URI when using Broadsoft N-way calling feature.
Configures Music On Hold URI to call when a call is on hold. This feature has
to be supported on the server side.
Configures the prefix prepended to the BLF extension when the phone picks
up a call with BLF key. The default setting is **.
Enables presence feature on the phone. The default setting is "No".
Omit charset=UTF-8 in MESSAGE content-type
Different soft switch vendors have special requirements. Therefore users may
need select special features to meet these requirements. Users can choose
from Standard, Nortel MCS, Broadsoft, CBCOM, RNK, Sylantro, Huawei IMS
and PhonePower depending on the server type. The default setting is
"Standard".
Default setting is "No". When set to "Yes", a soft key "BSCCenter" is displayed
on LCD. User can access different Broadsoft Call Center agent features via
this softkey. Please note that "Feature Key Synchronization" will be enabled
regardless of this setting.
Broadsoft Hoteling event feature. Default setting is "No". With "Hoteling Event"
enabled, user can access the Hoteling feature option by pressing the
"BSCCenter" sof tkey.
When set to "Yes", the phone will send SUBSCRIBE to the server to obtain call
center status. The default setting is "No".
When enabled, Feature Key Synchronization will be enabled regardless of
web settings.
This feature is used for Broadsoft call feature synchronization. When it's
GXP2130/GXP2140/GXP2160
ADMINISTRATION GUIDE
BLF URI on the
extensions in the
service side first (i.e.,
list, under Web
Page 32 of 68