Grandstream Networks GXP2130 Administration Manual page 44

Softkeys
GXP2130/GXP2140/GXP2160
FIRMWARE VERSION 1.0.4.10
the call. "Enable MPK Sending DTMF" has to be set to "Yes" first.

Voice Mail
Select Account and enter the Voice Mail access number in the Value
field.

Call Return
The last answered calls can be dialed out by using Call Return. The
Value field should be left blank. Also, this option is not binding to the
account and the call will be returned based on the account with the
last answered call.

Transfer
Select Account, and enter the number in the Value field to be
transferred (blind transfer) during the call.

Call Park
Select Account, and enter the call park extension in the Value field to
park/pick up the call.

Intercom
Select Account, and enter the extension number in the Value field to
do the intercom.

LDAP Search
This option is to narrow the LDAP search scope. Enter the LDAP
search base in the Name field. It could be the same or different from
the Base in LDAP configuration under Advanced Settings. The Base
in LDAP configuration will be used if the Name field is left blank.
Enter the LDAP Name/Number filter in the Value field. LDAP search
does not support entering Non-ASCII characters

Multicast Paging
This option is for multicast sending. Enter Line key description in
Description filed and multicast sending address in Value field.
Assigns a function to the corresponding softkeys. GXP2140/GXP2160
supports 3 configurable softkeys; GXP2130 supports 3 configurable
softkesy. (The first and last softkeys are reserved for Exit/More
functionality.)
The key mode options are:

Speed Dial
Select the Account to dial from. And enter the Speed Dial number in
the Value field to be dialed.

Speed Dial via active account
GXP2130/GXP2140/GXP2160
ADMINISTRATION GUIDE
Page 44 of 68