CDA HVC93 Manual For Installation, Use And Maintenance page 5

Ceramic hobs
Table of Contents

Advertisement

How to use the hob
The ceramic surface of the hob allows fast transmission of heat
vertically from the heating elements under the glass to the pans
on the hob top.
The heat does not spread horizontally, so the hob top remains
relatively cool only a few centimetres from the zone in use.
Please note:
The heating elements are equipped with a temperature limiter
that will switch the element off to prevent damage to the hob.
The temperature limiter may also operate when incorrect pans
are used or pans are poorly positioned. This will affect cooking
performance.
The temperature limiter can be seen in the zone as the straight
line out from the centre of the element. This is not a fault with
the hob.
To switch the hob on
Touch and hold
until the zone displays show 0.
Please note:
If a zone is not selected or the timer set within approximately 10 seconds, the hob will automatically switch off.
To switch on a zone
Once the hob is switched on, touch
EITHER Touch and hold
to select the power level from 1 (minimum) to 9 (maximum). The power level selected will show on
the zone display.
OR Touch and hold
to select the power level from 9 to 1.
The zone will remain active for approximately ten seconds to allow for adjustment.
To adjust the power level once set
Touch
for the zone required. The zone indicator will switch on to confirm the zone is active.
Touch and hold
or
until the required power level shows on the zone display.
To use the dual zone
The dual zones are formed from two separate coils.
Touch
at any time to switch the dual zone on or off when the zone is switched on for either of the dual zones.
The dual zone indicator will switch on when the dual zone is on.
To switch off a zone
Touch
for the zone required.
Touch and hold
until the zone display shows 0.
The zone display will show 0 for 10 seconds, then H to indicate the residual heat.
To switch the hob off
Touch and hold
at any time.
for the zone required. The zone indicator will switch on to confirm the zone is active.
Hi-light cooking zone
Ø 140mm
Second element
Hi-light double zone
fig. 4
fig. 5
4

Advertisement

Table of Contents
loading

Table of Contents