Cradlepoint MBRB Product Manual page 99

MBR1200B| USER MANUAL Firmware ver. 4.1.1
CRADLEPOINT
AT Dial Script: This is included for legacy devices only. Most users will not use this option. Go to SIM/APN Settings
instead if you need to select a specific Access Point Name.
If you do need this option for older devices, enter the AT commands to be used in establishing a network connection.
Each command must be entered on a separate line. All command responses must include "OK" except the final command
response, which must include "CONNECT".
Example:
AT
ATDT*99***2#
PPP Authentication Protocol: Set this only if your service provider requires a specific protocol and the Auto option
chooses the wrong one.
• Auto
• PAP (Password Authentication Protocol)
• CHAP (Challenge Handshake Authentication Protocol)
PPP Username: Username for PPP authentication.
PPP Password: Password for PPP authentication.
© 2013 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE.CRADLEPOINT.COM/ FOR MORE HELP AND RESOURCES PAGE 97