Cradlepoint MBRB Product Manual page 147

MBR1200B| USER MANUAL Firmware ver. 4.1.1
CRADLEPOINT
• MD5 with DES encryption
• SHA with DES encryption
• MD5 with AES encryption
• SHA with AES encryption
Username: Enter the Username configured on your SNMP host in the username field.
Password: Enter the Password for your SNMP host in the password and verify password fields. This password must be
at least 8 characters long.
Enable SNMP traps: Enabling traps will allow you to configure a destination server, community, and port for trap
notifications. Trap notifications are returned to the server with SNMPv1.
Trap community string: The trap notifications will be returned to the trap server using this SNMPv1 trap community
name.
Address for trap server: Enter the address of the host system that you want trap alerts sent to.
Trap server port #: Enter the port number that the remote host will be listening for trap alerts on. (Default: 162)
8.3.3 System Information
System information via SNMP is Read-Writable by default. However, if a value is set here, that field will become Read-
Only.
System Contact: Input the email address of the system administrator.
System Name: Input the router's hostname.
System Location: Input the physical location of the router. This is simply a string for your own information.
© 2013 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE.CRADLEPOINT.COM/ FOR MORE HELP AND RESOURCES PAGE 145