Cradlepoint MBRB Product Manual page 74

MBR1200B| USER MANUAL Firmware ver. 4.1.1
CRADLEPOINT
6.6 WiFi / Local Networks
This section is used to configure the settings for wireless
networks created by your router. Note that changes
made in this section may also need to be duplicated on
wireless devices that you want to connect to your
wireless network.
For example, if you change a LAN's IP address, devices within that
network will lose connection. They will have to reconnect to the
network.
The user can set up multiple networks, each with its own
unique configuration and its own selection of interfaces.
Each local network can be attached to WiFi and/or
Ethernet.
6.6.1 Local IP Networks
Local IP Networks displays the following information for each network:
• Network Name and IP address/Netmask (along the top bar)
• Enabled (Yes/No)
• DHCP Server (Enabled/Disabled)
• Schedule (Enabled/Disabled – See the
Schedule tab in the Local Network
Editor)
• Routing Mode (NAT, Standard,
Disabled)
• Access Control (Admin Access, UPnP
Gateway, LAN Isolation)
• Attached Interfaces (Ethernet ports, WiFi)
Click Add to configure a new network, or select an existing network and click Edit to view configuration options.
© 2013 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE.CRADLEPOINT.COM/ FOR MORE HELP AND RESOURCES PAGE 72