Cradlepoint MBRB Product Manual page 98

MBR1200B| USER MANUAL Firmware ver. 4.1.1
CRADLEPOINT
7.1.5 Modem Settings
On Demand: Typically modem connections are not always on. When this mode is selected a connection to the Internet is
made as needed. When this mode is not selected a connection to the Internet is always maintained.
Aggressive Reset: When Aggressive Reset is enabled
the system will attempt to maintain a good modem
connection. If the Internet has been unreachable for a
period of time a reset of the modem will occur in attempt to
re-establish the connection.
Modem Connection Mode: Specify how the modem
should connect to the network. Not all options are
available for all modems; this will default to Auto if an
incompatible mode is selected.
• Auto (all modes): Let the modem decide which
network to use.
• Auto 3G (3G or less): Let the modem decide which
2G or 3G network to use. Do not attempt to connect
to LTE.
• Force LTE: Connect to LTE only and do not
attempt to connect to 3G or WiMAX.
• Force 3G (EVDO, UMTS, HSPA): Connect to 3G
network only.
• Force 2G (1xRTT, EDGE, GPRS): Connect to 2G network only.
© 2013 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE.CRADLEPOINT.COM/ FOR MORE HELP AND RESOURCES PAGE 96