Travis Industries - Travis Industries Lopi GreenField GS Owner's Manual

Finalizing the Installation
Rear Log Placement
The rear log has two obround holes on the bottom. Place the log so the pins on the burner insert into
the holes on the log (see photos below). Once in place, carefully pull the log all the way forward.
This allows the log to glow above the rear burner holes. NOTE: If you encounter sooting on the rear
log, move the log back until sooting is eliminated.
Left Log Placement
The left log has a hole on the bottom. Place the log so the bolt on the burner inserts into the hole on
the log (see photos below). Position the log so the right side straddles the burner holes. The log
must not cover any burner holes and should have a gap at the front (see arrows below).
© Travis Industries
(for qualified installers only)
4101028
29
100-01255_000