AMT Datasouth Accel-7350 Service Manual page 58

Step 4. Slide the carrier to extreme left along the F guide shaft.
Step 5. Slide the pinch roller drive shaft to the left and then right out of the mechanism.
INSTALLATION
FC Shaft
Follow the reverse of the above procedure.
Note: When installing the pinch roller shaft assembly, the "D" shape side of the shaft
is placed to the left.
Pinch roller driver Assembly B (Front)
REMOVAL
Step 1. Remove top enclosure.
Step 2. Unhook the friction spring from the FC shaft.
Step 3.Detach the paper feed shaft intermediate gear on the right side of the pinch roller drive
shaft B by removing 1 pan head screw (S-6); then remove the E-ring (E4) on either end
of the pinch roller drive shaft.
Step 4. Slide the pinch roller drive shaft to right the and then left out of the mechanical block.
INSTALLATION
Follow the reverse of the above procedure.
Note: When installing the pinch roller shaft assembly, note the "D" shape side of the shaft
is placed to the right.
57