Turning on the power
This section describes how to turn on the power.
The Power LED indicates the status. Refer to the
Chapter 6, Power and Power-Up Modes.
■
After you turn on the power for the first time, do not turn it off until you
have set up the operating system. Refer to the section
the first
■
If the USB floppy disk drive is connected, make sure it is empty. If a
floppy disk is in the drive, press the eject button and remove the floppy
disk.
1. Open the computer's LCD display panel.
2. Press and hold the computer's power button for two or three seconds.
Do not push the power button strongly.
Starting up for the first time
When you first turn on the power, the computer's initial screen is the
Microsoft Windows XP Startup Screen Logo. Follow the on-screen
directions for each screen. During setup, you can click the Back button to
return to the previous screen.
Be sure to read the Windows End User License Agreement display
carefully.
Turning off the power
The power can be turned off in one of the following modes: Shut down
(Boot), Hibernation or Standby mode.
User's Manual
time.
Power button
Figure 3-6 Turning on the power
Getting Started
Power indicator
section in
Starting up for
3-9