Right side and Back side
The following figure shows the libretto DVD Dock's right and back side.
Lock lever
Undock switch
Docking LED
Connecting the libretto DVD Dock
Follow the steps below to connect the computer to the libretto DVD Dock.
Before you connect the libretto DVD Dock, make sure you turn off the
computer and disconnect the AC Adaptor and any other external devices.
1. Turn the computer's power off.
2. Disconnect all cables connected to the computer.
3. Place the computer on the libretto DVD Dock so that the Docking holes
of the front-side of the computer are aligned with the libretto DVD
Dock's Front Latches.
User's Manual
Undock switch
Eject switch indicator
Figure 8-12 Right and back side the libretto DVD Dock
Rotating this will lock the libretto DVD Dock
connected to the computer so that it cannot be
removed.
Slide this to eject the computer. Slide to the left to
eject.
This indicator is lit up when the libretto DVD Dock
is connected to the computer. When the eject
operation is carried out, check that this indicator
is not lit before removing it.
Optional Devices
Lock lever
8-15