Toshiba Hdd Protection Properties - Toshiba Libretto U100 User Manual

Operating Basics

TOSHIBA HDD Protection Properties

You can make the HDD Protection settings by using the TOSHIBA HDD
Protection Properties window. To open the window, click start point to All
Programs point to TOSHIBA point to Utilities and click HDD Protection
setting. The window can also be started from the icon on the Taskbar, or
from the Control Panel.
HDD Protection
You can choose whether to enable or disable HDD Protection.
Detection Level
This function can be set to four levels. The sensitivity levels in which
vibrations, impacts and their similar signs are detected can be set to OFF,
1, 2, and 3 in ascending order. Level 3 is recommended for better
protection of the computer. However, when the computer is used as
handheld or in other unstable conditions, setting the detection level to 3
could result in frequent execution of HDD Protection, which will slow HDD
reading and writing. Set a lower detection level when the speed of HDD
reading and writing is a priority.
4-40
Figure 4-17 TOSHIBA HDD Protection Properties
User's Manual