Toshiba Libretto U100 User Manual page 140

Power and Power-Up Modes
■
Do not remove the battery pack while the computer is in Standby
mode. Data is stored in RAM, so if the computer loses power it will be
lost.
■
In Hibernation mode, data will be lost if you remove the battery pack or
disconnect the AC adaptor before the save is completed. Wait for the
HDD indicator to go out.
■
Do not touch the battery release latch while holding the computer. Or
you may get injured by the dropped battery pack by unintentional
release of the battery release latch.
To remove a battery pack, follow the steps below.
1. Save your work.
2. Turn the computer's power off. Make sure the Power indicator is off.
3. Remove all cables connected to the computer.
4. Close the LCD display panel and turn the computer upside down.
5. Slide the battery lock (➀) to unlock position (
the back).
6. Slide and hold the battery release latch (➁) to free the battery pack for
removal, then slide out the battery pack (➂).
Battery lock
To install a battery pack, follow the steps below.
7. Insert the battery pack (➀).
6-12
Battery pack
Battery
release latch
Figure 6-1 Releasing the battery pack
) (Move it completely to
User's Manual