System Indicators - Toshiba Libretto U100 User Manual

Fingerprint Sensor
Power button

System indicators

LEDs beneath icons, light when various computer operations are in
progress.
DC IN
Power
Battery
HDD
User's Manual
Just by swiping the finger against the fingerprint
sensor, the following functions will be enabled:
■
Logon to Windows and access a security-
enabled homepage through IE (Internet
Explorer).
■
Files and folders can be encrypted/decrypted
and third party access to them prevented.
■
Disable the password-protected screen-saver
when returning from power-saving (standby)
mode.
Press the power button to turn the computer's
power on and off.
Figure 2-7 System indicators
The DC IN indicator glows in green when DC
power is supplied from the AC power adaptor. If
the adaptor's output voltage is abnormal or if the
power supply malfunctions, this indicator flashes
orange.
The Power indicator glows in green when the
computer is on. If you select Standby from Shut
Down Windows, this indicator blinking orange
(one second on, two seconds off) while the
computer shuts down.
The Battery indicator shows the condition of the
battery's charge: Green indicates full charge,
orange indicates battery charging and flashing
orange indicates a low battery charge. Refer to
Chapter 6, Power and Power-Up
The HDD indicator glows green when the
computer is accessing the built-in hard disk.
The Grand Tour
Modes.
2-9