Attaching The Ferrite Core To The Modular Cable - Toshiba Libretto U100 User Manual

Operating Basics

Attaching the ferrite core to the modular cable

The ferrite core that attaches to the modular cable bundled with this
product is explained here. When connecting the modular cable, attaching
the bundled ferrite core to the modular cable will help to reduce noise. To
attach the ferrite core, follow the steps below.
When attaching the ferrite core to the modular cable, please ensure that
the cable is set in the dimpled portion of the ferrite core. Furthermore,
please set the connector that is used to connect to the computer outside
the ferrite core. The modular cable might be damaged if the cable is not set
within the dimpled portion or the connector is set within the ferrite core.
1. Free the lock and the ferrite core is opened.
2. Adjust the modular cable so that it falls in the center dimple of the ferrite
core.
Please ensure that the connector of modular cable and the ferrite core
are placed around 30mm apart.
4-30
Figure 4-10 Opening the ferrite core
Figure 4-11 Opening the ferrite core
Lock
Ferrite core
User's Manual